Setting up a Brick Paver Walkway or Magnesite Bricks Suppliers

The use of Bricks or Pavers to create a walkway or patio area complements a house in a method that is unmatched. In addition, setting up a Brick or Paver sidewalk does not necessarily need a pro.

The key to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. The location must be removed at least a foot down, eliminating all topsoil and clay soil. In addition, string lines must be strung on each side of the pathway. The string lines suggest the finished height of the sidewalk.
Once the area has actually been dug down, 3/4" gravel stone should be laid in and tamped down tightly. The height between the tamped down sand and the stringline need to equal the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipeline or ledger board the length of the walkway on either side of the pathway. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface location to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared area. These strips will serve as your sidewalk border and aid to keep the integrity and shape of the pathway. You can get these plastic strip borders at most home improvement shops. The strips need to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist maintain the integrity of the pathway.

Undoubtedly bricks/pavers will require to be cut or split when constructing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you desire to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.

After installing the bricks, construct up the outdoors edges with extra sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the brand-new pathway and sweep into the fractures. This will complete the interlocking of the bricks and help to get rid of any weed growth.


In addition, setting up a Brick or Paver sidewalk does not necessarily require a pro. The key to setting up a Brick or get more info Paver Walkway is to very first effectively prepare the location where check here the bricks/pavers are to be installed. Now that you have a stable base, position a 1" pipeline or ledger board the length of the walkway on either side of the pathway. These strips will act as your sidewalk border and aid to maintain the integrity and shape of the pathway. Undoubtedly bricks/pavers will require to be cut or divided when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *